Home Aboutus Product Service Contact Us
Solar Domestic Water Heater
Solar Industrial Water Heater
Hot Gen(Heat Pump Technology)
Solar PV module
Solar Power Pack
Solar Street Lighting System
Solar Garden Illuminating System
Solar Backup Unit
Solar Lantern
Solar Lamps
Solar Power Generator


Head Office
No.158, Kamaraj Salai,
Brindhavanam,
Puducherry - 605 013. India.
Ph:  0413-6530425
Tele Fax: 0413-4201774

E-mail:  sunmax_solar@rediffmail.com
sales@sunmax solar.net
Admin@sunmax solar.net

Website: www.sunmaxsolar.net


Branch Office
No.111, Tower Block, TNHB Flats
M.T.H Raod, Villivakkam
Chennai - 49
Tamil Nadu. India.
TeleFax: 044-64523778
Cell: 99945 97772, 97774



Technical Specification of Vaccum Tube

Length -   1500/1800/2100 MM
Diameter of outertube-   47 MM
Diameter of inner tube-  37 MM
Matreial -  Borosillicate glass3.3
Absorptive coating-  Graded CU-SS-AL
Thermal Expansion-  3.3 x 10-6°C
Absorptance-   > 92% (AM 1.5)
Emittance-  < 3% (80°C)
Vaccum-  p < 5 x 10-3Pa
Stagnation Temp-   > 200°C
  Solar Industrial Water Heater

Detailed Product Description


Working Principle

1.Circulation Pump working based on temperature difference
a) T1 SENSEOR fixed near the solar heating system, T2 sensor fixed in the water tank
T=T1-T2,
b) When the T - more than 6 degreee, circulation pump starts to run, if the temperature difference less than 2 degree, pump with cut-off
c) when T3 sensing temperature less than 40 degree, boost pump starts to run to ensure the outlet temperature
2. Water level will be maintained by magenetic control valve and water level controller
3. System with auto boosting facility is to ensure the pressure of hot water supply to bath rooms



Industrial Water Heater has the following features :
  • Life time ot solar water heater is minimum 15 years.
  • Always We can get Hot water anytime without electric power.
  • No possibility of getting electric shock
  • No Maintenance and operating cost.
  • Hard water also can be use
  • Substantial Savings in Electricity
  • Fastest Payback

Industrial models Available inour solar system is from 200 LPD to 50,000 LPD



Superiority of Evacuated Tube Technology
Evacuated Tube CollectorFlate Plate Collector(FPC)
1. Quick heat generation Slow heat generation
2. Heat absorbing surfaceis always perpendicular to sun-rays because of the cylindrical collector glass tube. Hence peak absorpption always The collector fins and tubes being flat, that incident sun-rays will be at 90 degrees only at noon. So the peak absorptions is also only during thhis time.
3. Vaccum inside the collector tube reduces heat loss at night. Heat loss will be more in collector panels at night.
4. Negligible scaling of tubes - can be cleaned manually (Inner dia 37mm) Consequent loss of efficiency is minimum Heavy Scaling of copper tubes which cannot be cleaned manually as bore dia is 12.50mm, causing substantial loss in the efficiency of the system.
5. Satisfactory performance in cold conditions performance falls significantly on cloudy and winter days
6. Temperature range from 60°C to 80°C on clear sunny days Temperature range from 50°C to 70°C only
7. Advanced technology at a competitive price Outdated technology, high price
8. Less area required for installation Unit occupies huge area
9.Incase of collector tubes damage, tubes can be replaced individually Enter glass has to be replaced in case oddamage, high cost for replacement.


Home | About us | Products | Service | Contact

Copyright ©SUNMAX Energy Systemss Pvt Ltd. Powered by Flyerztechnology.com